原著論文

* 本研究室の学生

2024

  1. 西野博貴*，篠崎彰宏*，細谷優一*，小川将喜*，米津明生，シランカップリング剤処理を施したアルミニウム合金／エポキシ系接着接合体の強度に関する分子動力学解析，日本接着学会誌，印刷中
  2. Kazuma Ogata*, Yuto Kasuya*, Xiang Gao, Yuto Shibayama*, Aoi Takagi*, Akio Yonezu, Jun Xu, Adhesion Strength of Active Material Layer/Cu Foil Interface in Silicon-based Anodes, ACS Applied Materials & Interfaces, in press.
  3. 梶原美紀*，長網奏里*，米津明生，マイクロ粒子衝突速度計測のための応力発光体センサーと粒子衝突試験法の開発，材料，印刷中
  4. Miki Kajihara*, Ryo Ichikawa*, Kanari Nagaami*, Hiroto Suzuki*, Akio Yonezu, Micro-dimple Textured Surface Produced by Laser-induced Particle Impact Test and Improving Tribological Performance, Materials Today Communications, » Link to DOI in press
  5. Miki Kajihara*, Kanari Nagaami*, Takeru Miyagawa*, Toshiyuki Kondo, Akio Yonezu, Development of a Velocity Measurement Method for a Microparticle Projectile and High-Speed Impact Testing of Metallic Materials for Grain Refinement, Acta Materialia, Volume 262, 1 January 2024, 119467. » Link to DOI

    2023
  6. Aoi Takagi*, Ryo Ichikawa*, Takeru Miyagawa*, Jinlan Song*, Akio Yonezu, Hideki Nagatsuka, Machine Learning–Based Estimation Method for the Mechanical Response of Composite Cellular Structures, Polymer Testing, Volume 126, September 2023, 108161 » Link to DOI
  7. Kazuma Ogata*, Wenxia Tan, Yoshinori Takano*, Akio Yonezu, Jun Xu, Mechanical Characterization and Modeling of Microstructural Deformation of Si Anode Sheet, Journal of Power Sources, Volume 580, 1 October 2023, 233442. » Link to DOI
  8. Aoi Takagi*, Yoshikatsu Kimoto*, Akihiro Shinozaki*, Hiroyuki Yamada, Tomohisa Kojima, Akio Yonezu, Development of LaSAT and Bonding Strength Evaluation of Epoxy Adhesive over a Wide Range of Loading Rates, The Journal of Adhesion, pp.1-23, 2023 » Link to DOI
  9. Ayumu Morimura*, Hiroki Nishino*, Miki Kajihara*, Yusuke Nakao*, Akio Yonezu, Molecular Dynamics and Experimental Studies of the Dependence of Strain Rate on the Indentation Deformation of Polycarbonate, Journal of Polymer Research, (2023) 30:254 » Link to DOI
  10. Shotaro Yasuda*, Takeru Miyagawa*, Akio Yonezu, Keiji Ishibashi, Laser Shock-Wave Adhesion Test (LaSAT) and Ab Initio Calculations for Adhesive Strength Evaluation of Thin Metallic films, Materials Today Communications, Volume 35, June 2023, 106237 » Link to DOI
  11. 西野博貴*，篠崎彰宏*，木本佳克*，山田浩之，米津明生，エポキシ系接着剤の接着強度に及ぼすひずみ速度の影響，日本接着学会誌，59 (6), 196-201, 2023.

    2022
  12. Takeru Miyagawa*, Yugo Sakai*, Kazuki Mori, Nobuhiko Kato, Akio Yonezu, Keiji Ishibashi, Distribution of the Mechanical Properties of Ti–Cu Combinatorial Thin Film Evaluated Using Nanoindentation Experiments and Molecular Dynamics with a Neural Network Potential, Materials Today Communications, 33 (2022) 104750, 11 pages » Link to DOI
  13. Ryoma Komine*, Shotaro Yasuda*, Miki Kajihara*, Akio Yonezu, Material Parameters in Constitutive Equation for Plastic Deformation at a High Strain Rate Estimated by High-Velocity Microparticle Collisions, Journal of Materials Engineering and Performance (American Society for Metals), 11 pages (2022) » Link to DOI
  14. Hiroki Nishino*, Kohei Kanamori*, Kazuma Okada*, Akio Yonezu, Fracture Behavior of an Alumina/Epoxy Resin Interface and Effect of Water Molecules by Using Molecular Dynamics with Reaction Force Field (ReaxFF), International Journal of Adhesion and Adhesives, Volume 119, December 2022, 103251 » Link to DOI
  15. Takeru Miyagawa*, Kazuki Mori, Nobuhiko Kato, Akio Yonezu, Development of Neural Network Potential for MD Simulation and Its Application to TiN, Computational Materials Science, Volume 206, 15 April 2022, 111303. » Link to DOI
  16. Yasuhisa Kodaira*, Yoshinori Takano*, Akio Yonezu, Characterization of Creep Deformation Behavior of Porous Polymer Membrane under Small-Punch Test, Engineering Failure Analysis, Volume 135, May 2022, 106149.» Link to DOI
  17. Yasuhisa Kodaira*, Tatsuma Miura*, Yoshinori Takano*, Akio Yonezu, Development of Biaxial Tensile Testing for Porous Polymer Membranes, Polymer Testing, Volume 106, February 2022, 107440, » Link to DOI

    2021
  18. Kohei Kanamori*, Yoshikatsu Kimoto*, Shuto Toriumi*, Akio Yonezu, On the Cyclic Fatigue of Adhesively Bonded Aluminium: Experiments and Molecular Dynamics Simulation, International Journal of Adhesion and Adhesives, Volume 107, June 2021, 102848 (13pages), » Link to DOI
  19. Kohei Kanamori*, Shuto Toriumi*, Yoshikatsu Kimoto*, Akio Yonezu, Repeated Laser Shock-wave Adhesion Test for Metallic Coatings: Adhesion Durability and Its Mechanism Studied by Molecular Dynamics Simulation, Coatings 2021, 11(3), 291 (18pages), » Link to DOI
  20. Yasuhisa Kodaira*, Tatsuma Miura*, Shoma Ito*, Kanako Emori*, Akio Yonezu, Hideki Nagatsuka, Evaluation of Crack Propagation Behavior of Porous Polymer Membranes, Polymer Testing, Volume 96, April 2021, 107124 (14 pages), » Link to DOI
  21. Fumika Nishimori*, Daiki Ikeshima*, Kohei Kanamori*, Hiroshi Yamamura, Akio Yonezu, Characterization of the Surface Degraded Layer of Polymers using an Indentation Method, Materials Today Communications, Vol.26, 101873 (10 pages) 2021, » Link to DOI

    2020
  22. Kohei Kanamori*, Yusaku Saito*, Takeshi Yamada*, Akio Yonezu, Xi Chen, Development of Adhesion Durability Evaluation of Surface Coatings Using Repeated Laser Shock-wave Adhesion Test, Journal of Nondestructive Evaluation Vol.39, 4, p87 (11 pages), » Link to DOI
  23. Xiaoyang Shi, Hang Xiao, Kohei Kanamori*, Akio Yonezu, Klaus S. Lackner, Xi Chen, Moisture-Driven CO2 Sorbents, Joule, Volume 4, Issue 8, 19 August 2020, Pages 1823-1837. » Link to DOI, » アリゾナ州立大学 (ASU News) , » 中央大学ニュース
  24. Kanako Emori*, Tatsuma Miura*, Takumi Nagakura*, Akio Yonezu, Indentation Failure of Polymeric Membrane with Anisotropic Pore Structures, Engineering Failure Analysis, Volume 115, September 2020, 104620 (13pages) » Link to DOI
  25. Kohei Kanamori*, Yoshikatsu Kimoto*, Shuto Toriumi*, Akio Yonezu, Evaluation of Adhesion Durability of Ni–P Coating using Repeated Laser Shock Adhesion Test, Surface and Coatings Technology, Volume 396, 25 August 2020, 125953 (9pages) » Link to DOIFeatured in “Advances in Engineering” » Link1 » Link2
  26. Kanako Emori*, Yusaku Saito*, Akio Yonezu, Liangliang Zhu, Xiangbiao Liao, Xi Chen, Surface Buckling Delamination Patterns of Film on Soft Spherical Substrate, Soft Matter, 2020, Issue.16, pp.3952-3961 » Link to DOI
  27. Kanako Emori*, Shugo Fushimi*, Tatsuma Miura*, Akio Yonezu, FEM simulation of polymeric foam with random pore structure: uniaxial compression with loading rate effect, Polymer Testing, Volume 82, February 2020, 106303 (7pages) » Link to DOI

    2019
  28. Kanako Emori*, Tatsuma Miura*, Hiroshi Kishida*, Akio Yonezu, Creep Deformation Behavior of Polymer Materials with a 3D Random Pore Structure: Experimental Investigation and FEM Modeling, Polymer Testing, vol.80, 106097 (6pages) 2019 » Link to DOI
  29. Xiangbiao Liao, Baidu Zhang, Takumi Furutani*, Youlong Chen, Hang Xiao, Yong Ni, Akio Yonezu, Xi Chen, Strain-guided Oxidative Nanoperforation on Graphene, Small, 1903213 (7pages) 2019 » Link to DOI
  30. Yusaku Saito*, Hiroki Watanabe*, Takeshi Yamada*, Kohei Kanamori*, Akio Yonezu, Interfacial strength evaluation of oxide films on carbon steel by using the laser shock adhesion test, Journal of Materials Engineering and Performance (American Society for Metals) 28(8), pp.4762-4773, August 2019 » Link to DOI
  31. Kazunori Miyamoto*, Daiki Ikeshima*, Takumi Furutani*, Hang Xiao, Akio Yonezu, Xi Chen, On the Surface Hydrophilization of a Blended Polysulfone Membrane: Atomic Force Microscopy Measurement and Molecular Dynamics Simulation, Surface Topography: Metrology and Properties, 7 (2019) 035003 11pages. » Link to DOI, » [PDF]
  32. Daiki Ikeshima*, Fumika Nishimori*, Akio Yonezu, Deformation Modeling of Polyamide 6 and the Effect of Water Content using Molecular Dynamics Simulation, Journal of Polymer Research, 26(6), p.151 (11pages), May 2019. » Link to DOI
  33. Daiki Ikeshima*, Kazunori Miyamoto*, Akio Yonezu, Molecular Deformation Mechanism of Polycarbonate during Nano-indentation: Molecular Dynamics Simulation and Experimentation, Polymer, 173(31), pp.80-87, May 2019. » Link to DOI, nanotools biosphere™ featured in research article » Link to Web
  34. Daiki Ikeshima*, Akihiro Matsuzaki*, Takumi Nagakura*, Kanako Emori*, Akio Yonezu, Non-linear Creep Deformation of Polycarbonate at High Stress Level: Experimental Investigation and FEM Modeling, Journal of Materials Engineering and Performance (American Society for Metals) 28(3), pp.1612-1617, March 2019, » Link to DOI

    2018
  35. Xiangbiao Liao, Takumi Nagakura*, Youlong Chen, Liangliang Zhu, Xiaoyang Shi, Akio Yonezu, Xi Chen, and Hang Xiao, Tunable Surface Morphology via Patterned Cavities in Soft Materials, Physical Review E, Vol.98, 063004 (2018). » Link to DOI
  36. Xiangbiao Liao, Youlong Chen, Takumi Nagakura*, Liangliang Zhu, Mingjia Li, Xiaoyang Shi, Akio Yonezu, Hang Xiao, Xi Chen, Unconventional Localization Prior to Wrinkles and Controllable Surface Patterns of Film/substrate Bilayers through Patterned Cavities, Extreme Mechanics Letters, Vol.25, pp.66-70 (2018). » Link to DOI
  37. Akio Yonezu, Hydrogen embrittlement cracking produced by indentation test (review article), Nanoindentation for length scales, in “Handbook of Nonlocal Continuum Mechanics for Materials and Structures”, Springer (in press) (ISBN 978-3-319-58727-1) December 24(2018) » Link to DOI
  38. Tomoki Akahori*, Takumi Nagakura*, Shugo Fushimi*, Akio Yonezu, An indentation method for evaluating the residual stress of polymeric materials: Equi-biaxial and non-equi-biaxial residual stress states, Polymer Testing, Vol. 70, September 2018, pp.378-388 » Link to DOI
  39. 赤堀智紀*，伏見脩吾*，長倉匠*，米津明生, マイクロインデンテーション法による金属材料の塑性特性と残留応力の同時推定法, 材料試験技術, Vol.63 No.2 (2018), pp.4-10
  40. Daiki Ikeshima*, Akio Yonezu, Ling Liu, Molecular origins of elastoplastic behavior of polycarbonate under tension: A coarse-grained molecular dynamics approach, Computational Materials Science,Vol.145 (2018) pp.306–319 » Link to DOI
  41. Yousuke Watanabe*, Akio Yonezu, Xi Chen, Measurement of interfacial fracture toughness of surface coatings using pulsed-laser-induced ultrasonic waves, Journal of Nondestructive Evaluation, Vol.37,2 (2018) pp.1-11 » Link to DOI
  42. Hidehiko Toyama*, Hiroshi Kishida*, Akio Yonezu, Characterization of fatigue crack growth of concrete mortar under cyclic indentation loading, Engineering Failure Analysis, Vol.83 (2018) pp.156–166 » Link to DOI

    2017
  43. Hiroshi Kishida*, Satoshi Ishizaka*, Takumi Nagakura*, Hiroaki Suzuki, Akio Yonezu, Fracture characterization of inhomogeneous wrinkled metallic films deposited on soft substrates, Journal of Physics D: Applied Physics, Vol.50 (2017) 495301 (11pp) » Link to DOI
  44. Shugo Fushimi*, Takumi Nagakura*, Akio Yonezu, Experimental and numerical investigations of the anisotropic deformation behavior of low-density polymeric foams, Polymer Testing Vol.63 (2017) pp.605-613. » Link to DOI
  45. Shoichi Fujisawa*, Akio Yonezu, Masafumi Noda, Baoxing Xu, Evaluation of elastoplasticity dependent creep property of magnesium alloy with indentation method: A reverse numerical algorithm and experimental validation, Journal of Engineering Materials and Technology (Transactions of ASME), Vol.139 (No.2), 021004(9pages) 2017 » Link to DOI
  46. Noriyuki Inoue*, Akio Yonezu, Yousuke Watanabe*, Hiroshi Yamamura, Baoxing Xu, Prediction of asymmetric yield strengths of polymeric materials at tension and compression using spherical indentation, Journal of Engineering Materials and Technology (Transactions of ASME), Vol.139 (No.2), 021002(11pages) 2017 » Link to DOI

    2016
  47. Shouichi Iio*, Kazuki Hasegawa*, Shugo Fushimi*, Akio Yonezu, Xi Chen, On compressive deformation behavior of hollow-strut cellular materials, Materials & Design, Vol.105 (2016) pp.1–8 » Link to DOI
  48. Yousuke Watanabe*, Shoichi Fujisawa*, Akio Yonezu, Xi Chen, Quantitative evaluation of adhesion quality of surface coating by using pulse laser-induced ultrasonic waves, Surface and Coatings Technology, Vol.286(2016) pp.231-238 » Link to DOI
  49. Akio Yonezu, Keita Hirayama*, Hiroshi Kishida*, Xi Chen, Characterization of the compressive deformation behavior with strain rate effect of low-density polymeric foams, Polymer Testing, Vol.50(2016) pp.1-8 » Link to DOI , Ranked in “The most downloaded articles from ScienceDirect in the last 90 days” » [Link]
  50. Shouichi Iio*, Akio Yonezu, Hiroshi Yamamura, Xi Chen, Deformation modeling of polyvinylidenedifluoride (PVDF) symmetrical microfiltration hollow-fiber (HF) membrane, Journal of Membrane Science, Vol.497(2016) pp.421–429 » Link to DOI Featured in “Advances in Engineering” » Link1 » Link2

    2015
  51. Noriyuki Inoue*, Akio Yonezu, Yousuke Watanabe*, Takeo Okamura, Kouji Yoneda, Baoxing Xu, Prediction of viscoplastic properties of polymeric materials using sharp indentation, Computational Materials Science, Vol.110 (2015) pp.321-330 » Link to DOI
  52. Hidehiko Toyama*, Michihiro Niwa*, Jun Xu, Akio Yonezu, Failure assessment of a hard brittle coating on a ductile substrate subjected to cyclic contact loading, Engineering Failure Analysis, Vol.57 (2015) pp.118–128 » Link to DOI
  53. Akio Yonezu, Michihiro Niwa*, Xi Chen, Characterization of hydrogen-induced contact fracture in high strength steel, Journal of Engineering Materials and Technology (Transactions of ASME), Vol.137 (2015-4) 021007 (7 pages) » Link to DOI
  54. Michihiro Niwa*, Taiki Shikama*, Akio Yonezu, Mechanism of hydrogen embrittlement cracking produced by residual stress from indentation impression, Materials Science & Engineering A, Vol.624 (2015) pp.52–61 » Link to DOI
  55. Akio Yonezu, Ryota Kusano*, Tomohiro Hiyoshi*, Xi Chen, A method to estimate residual stress in austenitic stainless steel using a microindentation test, Journal of Materials Engineering and Performance (American Society for Metals), Vol.24(1), (2015-1), pp.362-372 » Link to DOI

    2014
  56. 草野涼太*，米津明生，ナノ・マイクロインデンテーション法を用いた高温高圧水環境で生成する酸化皮膜の力学特性評価，材料試験技術, Vol.59, No4, (2014) pp.203-208
  57. Shoichi Fujisawa*, Akio Yonezu, Takeo Okamura, Kouji Yoneda, Estimation of microstructural plastic property of die-cast Mg alloy (AZ91D) with an elevated temperature indentation, Materials Science & Engineering A, Vol.616 (2014) pp.63–70 » Link to DOI
  58. Akio Yonezu, Shouichi Iio*, Takehiro Itonaga*, Hiroshi Yamamura, Xi Chen, Tensile deformation of polytetrafluoroethylene (PTFE) hollow fiber membrane used for water purification, Water Science and Technology, Vol.70, No.7 (2014) pp.1244-1250 » Link to DOI
  59. Akio Yonezu, Xi Chen, Micro-scale damage characterization in porous ceramics by an acoustic emission technique, Ceramics International, Vol.40 (2014) pp.9859–9866 » Link to DOI

    2013
  60. Akio Yonezu, Hirotaka Akimoto*, Shoichi Fujisawa*, Xi Chen, Spherical indentation method for measuring local mechanical properties of welded stainless steel at high temperature, Materials & Design, Vol.52 (2013) pp.812–820 » Link to DOI
  61. Akio Yonezu, Masanori Tanaka*, Ryota Kusano*, Xi Chen, Probing out-of-plane anisotropic plasticity using spherical indentation: A numerical approach, Computational Materials Science, Vol.79 (2013) pp.336–344 » Link to DOI
  62. Hiroyuki Hirakata, Tomohiro Maruyama, Akio Yonezu, Kohji Minoshima, Creation of freestanding wrinkled nano-films with desired deformation properties by controlling the surface morphology of a sacrificial layer, Journal of Applied Physics, 113, 203503 (13pages) (2013) » Link to DOI
  63. Akio Yonezu, Ryota Kusano*, Xi Chen, On the mechanism of intergranular stress corrosion cracking of sensitized stainless steel in tetrathionate solution, Journal of Materials Science, Vol.48, No.6 (2013) pp.2447–2453 » Link to DOI
  64. Akio Yonezu, Michihiro Niwa*, Jiping Ye, Xi Chen, Contact fracture mechanism of electroplated Ni–P coating upon stainless steel substrate, Materials Science & Engineering A, Vol. 563 (2013) pp.184–192 » Link to DOI

    2012
  65. 近藤俊之，今岡貴裕，平方寛之，米津明生，﨑原雅之，箕島弘二，自立ナノ薄膜の疲労き裂進展試験法の開発，日本機械学会論文集A編，Vol. 78 (2012), pp. 808-816
  66. Hiroyuki Hirakata, Naomichi Fukuhara, Shoichi Ajioka, Akio Yonezu, Masayuki Sakihara, Kohji Minoshima, Thickness effect on steady state creep properties of freestanding aluminum nano-films, Acta Materialia Vol. 60 (2012), pp. 4438-4447
  67. Hiroyuki Hirakata, Yoshifumi Ajioka, Akio Yonezu, Kohji Minoshima, Fabrication and mechanical properties of column-particle nanocomposites by multiscale shape-assisted self-assembly, Journal of Physics D: Applied Physics, 45 (2012) 025302 (8pp)
  68. Akio Yonezu, Takuma Hara, Toshiyuki Kondo, Hiroyuki Hirakata and Kohji Minoshima, Evaluation of threshold stress intensity factor of hydrogen embrittlement cracking by indentation testing, Materials Science & Engineering A, Vol.531, No.1, pp.147– 154 (2012)
  • 2011年以前（56番目まで）は，こちら
著者の所属機関

[順不同] : 中央大学（精密機械工学科），中央大学（人間総合理工学科），中央大学（経営システム工学科），中央大学（ビジネスデータサイエンス学科），大阪大学（機械工学専攻），日産アーク㈱，コロンビア大学（アメリカ），西安交通大学（中国） ，漢陽大學校（韓国），バージニア大学UVa（アメリカ），権田金属工業㈱，ユタ州立大学（アメリカ），西北大学（中国），中国科学技術大学（中国），アリゾナ州立大学ASU(アメリカ)，伊藤忠テクノソリューションズ㈱CTC，㈱コメット，防衛大学校，ノースカロライナ大学（アメリカ）, 九州大学，JAXA｜宇宙航空研究開発機構，デラウェア大学（アメリカ）

米津研究室

材料強度物性学

中央大学 理工学部 精密機械工学科

〒112-8551　東京都文京区春日1-13-27
中央大学 後楽園キャンパス2号館6階

2623：教員室　2620：学生室　2624：実験室

Yonezu Group

Materials Science and Mechanics

Department of Precision Mechanics, Faculty of Science and Engineering
Chuo University, Korakuen Campus

1-13-27 Kasuga, Bunkyo, Tokyo, 112-8551, Japan

Copyright © Yonezu Group
トップへ戻るボタン